AUT300 Improved Ultrasonic Thickness gauge for metal thickness testing

Ultrasonic Thickness Gauge AUT300 is a new generation of intelligent ultrasonic thickness gauge,

using the latest high performance and low power consumption microprocessor technology, based on the principle of ultrasonic measurement, to measure the thickness of metal, glass, ceramics and other materials, and the materials of sound velocity measurement. Is widely used in all kinds of plate, pipe wall thickness, the boiler container wall thickness, all kinds of pipeline and pressure vessel, thickness measurement, monitor them in the process of using the degree of corrosion after thinning. With communication software, can be connected to computer.

Measuring range:	0.75mm~300.0mm(0.03inch~11.8inch)
Units:	Metric/Imperial unit seletable
Sound Velocity Range:	1000m/s~9999m/s(0.039~0.394in/μs
Display resolution:	0.01mm or 0.1mm(lower than 100.0mm) 0.1mm(more than 99.99mm)
Accuracy:	±(0.5%Thickness+0.04)mm,depends on Materials and conditions
Data Memory:	5 files(up to 100 values for each file)of stored values 5 Sound Velocity of stored values
Power Source:	2pcs 1.5V AA size,batteries.250 hours typical operating time(LED backlight off)
Outline Dimensions:	150mm74mm32mm
Workpiece surface temperature:	Up to 300 degrees Celsius
The minimum thickness value capture capacity	With a minimum thickness value capture capacity
Standard configuration	NDT300G host, 5MHz probe, 4 mm steel calibration block, coupling agent, 2 batteries (non - Aviation)
Measurement cycle:	4 times/SEC, scanning of single point measurement model 20 times per second.
Weight:	238 g
Power source:	Type AA alkaline battery 1.5 V (2)
Optional attachments:	2 MHZ, 7 MHZ and 5 MHZ (high temperature)

1.The advantages of ultrasonic thickness gauge AUT300	The same price of other types of Thickness Gauge
2.Menu operation, high brightness LCD LCD display, LED backlight	Fault code EL display, power consumption, dark environment can not see
3.Sound speed adjustable, can be a variety of materials measurement	Low-cost manufacturers only 5920 a steels velocity
4.It can be matched with various probe (coarse, small size, high temperature) without the need for calibration, automatic calibration	Multiple probes cannot identify automatically
5.A minimum acquisition indicator	No minimum thickness capture capacity
6.Can store 500 sets of data and 5 documents	Can store 50~100 data set
7.The internal use of highly integrated motherboards, chips are imported, stable performance!	Most of the two circuit boards, using a homemade device mostly, unstable performance
8.With USB interface, can be connected to a computer with a data processing software	No interface and data software

Model	Freq MHZ	Diam mm	Measuring Range	Lower limit	Description
N02	2	22	3.0mm～300.0mm（In Steel） 40mm (in Gray Cast Iron HT200)	20	for thick, highly attenuating, or highly scattering materials
N05	5	10	1.2mm～230.0mm（In Steel）	Φ20mm×3.0mm	Normal Measurement
N05 /90°	5	10	1.2mm～230.0mm（In Steel）	Φ20mm×3.0mm	Normal Measurement
N07	7	6	0.75mm～80.0mm （In Steel）	Φ15mm×2.0mm	For thin pipe wall or small curvature pipe wall measurement
HT5	5	14	3～200mm （In Steel）	30	For high temperature (lower than 300℃) measurement.