● LCD-display,
● Two display modes (SAVE and FREE).
● Two units — Fe% and FN (WRC number).
● Statistics display together with measurements.
● Built-in Rs-232 interface for printer（Option if need）
3. Technical data
The meter is mainly used for the determination of the ferrite content
of welded austenitic steel or Duplex or cladding of austenitic
chromium-nickel steel weld.
Type SP10
Probe SF-1.0a
Range： 0.1~80%Fe , ( 0.1~110)WRC-number
Precision： ±2%(raneg0.1~30%Fe), ±3%(raneg30~80% Fe)
Operating temperature：5 ~ 40℃
Batteries : 9v 6F22
LX WX H 175X100X38mm
-
In the chemical industry the stress-bearing members of containers，pipes，reactor vessels and other plant are usually made of austenitic steel or duplex steel or cladding of austenitic chromium-nickel steel．The residual ferrite content must be within a specific range compatible with the mechanical strength requirements or the item concerned．The SP10 was developed to facilitate accurate ferrite content
measurements on welded seams and cladding items. It gives results that match for the standards of GB/T1954-2008、ISO 8249 and ANSI/AWSA4.2.
Type SP10
Probe SF-1.0a
Batteries : 9v 6F22
Carrying-case ,
Operating Manual
