1. mutiple mosaic sizes
2. fully automatic
3. metallographic or lithofacies
4. rapid prototyping
5. easy use
ZXQ-2 Automatic Metallographic Sample Mounting Press
Automatic Metallographic Sample Mounting Press is used to inlay small specimens,
specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallurgical or rock specimens.
The inlaying operation serves to facilitate the grinding and polishing operations of the
specimens and the routine observation of the composition of the material under the metallographic microscope.
The machine is heated, and intensified with pressure automatically.
After the formation of the specimen under pressure, it stops the operation and discharges the pressure also
in an automatic way.
Technical Specification
ZXQ2-22
ZXQ2--30
ZXQ2-45
Order#r
713-252
713-262
713-272
Mould diameter
φ22mm
φ30mm
φ45mm
Input voltage
220V/50Hz; 110V/60Hz
Power
Max. 1000W
Pressure
0~2MPa
Temperature
0~300℃
Mounting time
0~99 minutes and 0~59 seconds can be setup
Dimension
380×350×420mm
Net Weight
100Kg
Cooling system
By water
- Automatic Metallographic Sample Mounting Press is used to inlay small specimens, specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallurgical or rock specimens.
Main unit
Power cable