-
Advanced Leeb Hardness Model
-Automatic identification of Impact devices
-On-Board memory holds 48-350 groups of data
-Software to connect with PC
-Upper and lower limit and sound alarm
-Large LCD with backlight, showing all functions and parameters
-Press HELP key can obtain operating tips in any displaying interface
-Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
-For all metallic materials
-Test at any angle, even upside down
-Wide measuring range
-Six Impact Devices are available for special application
-Battery low indication and sound alarmImpact devices Application :
Impact device D :
For the majority of the hardness measurement
Impact device DC:
For very small place ( holes, cylindrical Park) measurement
Impact device D + 15
For the groove or concave surface hardness measurement
Impact device E
For extremely high hardness, high content of carbide tool steel hardness measurement
Impact device C
For surface hardening components, surface covering layer, the hardness measurement of thin wall
Impact device G
Only for the dense parts which Brinell hardness value in the range of 650HB hardness measurement
Impact device DL
For deep trough bottom or surface ( such as a tooth ) and other parts of the measurement
Hardness scale
HL, HRC, HRB, HRA, HV, HB, HS
Memory
48-350 group (Impact times:32-1)
Measuring range
(170~960)HLD
Tensile strength U.T.S. range
374~2652 MPa
Accuracy
±6HLD (760±30HLD) error of displayed value
6HLD (760±30HLD) repeatability of displayed value
Standard Impact Device
D
Optional Impact Devices
DC/D+15/G/C/DL
Max. Workpiece Hardness
996HV(For Impact Devices D/DC/DL/D+15/C)
646HB(For Impact Device G)
Min. Radius of Workpiece (convex/concave)
Rmin = 50mm (with special support ring Rmin= 10mm )
Min. Workpiece weight
2~ 5kg on stable support
0.05~ 2kg with compact coupling
Min. Workpiece thickness
5mm (Impact Devices D/DC/DL/D+15)
1mm (Impact Device C)
10mm (Impact Device G)
Min. thickness of hardened layers
0.8mm
Power
Rechargeable Li Battery , 4.2V,Li(1200mAh)
Continuous Working time
About 100h, (without backlight)
Charging time
2~3.5 hours
Operating temperature
0~ 40ºC
Humidity
±90%
Overall dimensions
179×77×35mm
Weight
175g
The application of Leeb hardness tester
It can be wildly used in petroleum, mechanism, chemical engineering, metallurgy, aeration and space, pressure vessel and so on industries. It works primarily by checking the hardness to do the invalidation analysis.
The advantage of Leeb hardness tester (compared with the bench one): convenience: when the checked unit is large-sized, hard to move or need check on the spot, under this circumstances, only the Leeb hardness tester fits.
1. Primary use
l Installed machine or abiding assembly parts; such as boiler, metal pipes and turbo vanes.
l Mould; large producing part: roller, crank, tramroad of the machine and so on.
l Invalidation analysis of pressure vessel, steam generator and other equipments.
l The narrow space in the main shaft and the bottom of groove.
l The product line of bearings and other parts.
l Demanding the original records of the results
l Distinguishing of materials in the metal material warehouse.
2. Idiographic application
1). Aeration and space: being used in the examination of engine and structural parts of plane, the engine structure repairing manual prescribes that some components and parts are forbidden to disassemble, in addition, some parts are very difficult to remove. Then we can use the Rockwell hardness tester to deal with it. For example, when the plane engine catch fire, we should check the influenced area by hardness tester to determine the repairing area. Some other large construal parts need the portable Leeb hardness tester, such as: all grades of turbo plate, high and low pressure turbo shaft.
2). Mechanical manufacture
Machine industry: checking the machine body, leg, the track face of sliding saddle and so on.
Heat treatment industry: checking the hardness of the vulcanized layer treated by cementite, quencher.
Car industry: generate parts, crank, cylinder cover, inner cavity, cylinder, bearing bush, redirector.
Engine factory: crank, bearing and large casting.
. Gas-engine factory: body of the engine, crank, camshaft, connecting bar, press cover of flywheel, bushing cover and so on.
Home appliance industry: air condition, refrigerator, washer, and in addition, the hardness testing of tooth flank, cavity of mould.
3). Boiler and pressure vessel industry: The main testing parts of boiler is pipes, air bags. They are connected with expansion. According to the regulation, before the expansion, the pipe and the air bag both need hardness testing to insure the hardness of airbag is higher than the pipe’s.
4). Petroleum and chemical engineering industry: In this industry, hardness tester is wildly used in the examination of pipeline and vessles.
5). Power station ( thermoelectricity ): pyrobolts, impellers.
6). Universities and institutes: Usually used for teaching or scientific research, analyzing the metal material with Rockwell hardness tester.
· Standard delivery
· Main unit
· Impact Device type D
· Test block HLD
· Charger
· Brush
· Table support for main unit
· Connecting cable
· Company certificate
· Instruction manual
· Dataview Software
Optional accessories
· Printer
· Optional impact devices
· Optional support rings
· Other test blocks
Tester with accessories case
·
Two colors can be chosen