- SpecificationDisplay screen2.4VGA(320X240) color OLED , 10000:1Working TheoryUltrasonic pulse / echo / echo method using double crystal probeTesting range0.6mm --508mm(0.025-20 inch)Testing Resolution0.01mm or 0.1m(0.01 or o.1inch)UnitMm/inchDisplay ModeThickness Value mode,Min./Max. Value capture mode,Difference / reduction modeV path modificationAutomatic V path correction to compensate the non-linearity of double crystal probeMeasurement update rate4HZ,8HZ,16HZ/second optionalVelocity range500-9999m/s, 0.0179-0.3937in/usLanguageChinese/English/FrenchAlarm settingMax./Min. Value alarm, Dynamic change of thickness reading color during alarmPower1.5vAA battery x 2Power offManual/5,10,20 Minutes latter turning off automaticWorking Temperature-10 C to 50 CSize153mmx76mmx37mmWeight280g(with battery)Color Live A-Scan with waveform Adjust
Thru coating capability optional
Pocket size and Large screen display
Date logger
Thickness Value mode,
Min./Max. Value capture mode,
Difference / reduction mode
- SpecificationDisplay screen2.4VGA(320X240) color OLED , 10000:1Working TheoryUltrasonic pulse / echo / echo method using double crystal probeTesting range0.6mm --508mm(0.025-20 inch)Testing Resolution0.01mm or 0.1m(0.01 or o.1inch)UnitMm/inchDisplay ModeThickness Value mode,Min./Max. Value capture mode,Difference / reduction modeV path modificationAutomatic V path correction to compensate the non-linearity of double crystal probeMeasurement update rate4HZ,8HZ,16HZ/second optionalVelocity range500-9999m/s, 0.0179-0.3937in/usLanguageChinese/English/FrenchAlarm settingMax./Min. Value alarm, Dynamic change of thickness reading color during alarmPower1.5vAA battery x 2Power offManual/5,10,20 Minutes latter turning off automaticWorking Temperature-10 C to 50 CSize153mmx76mmx37mmWeight280g(with battery)
-
HIGH ACCURACY ULTRASONIC THICKNESS GAUGE
The ultrasonic thickness gauge Model AUT600 series are featured as cost-efficiency and designed to make accurate measurements on steel, cast iron, aluminum, red copper, zinc,quartz glass,
polyethylene, PVC, gray cast iron and nodular cast iron. Thickness measurements are made from one side of the
material with no need to cut the part.